[ABELUNA] Aqua Peel M-200

Name:
Abeluna Aqua Peel M-200

Volume:
1x Device
2x Suction headpiece
1x Suction hose
1x Adaptor
1x Peeling Solution 

Made in:
South Korea

Product Description:
Abeluna Aqua Peel M-200, is a revolutionary at-home device that provides the same brilliant results as professional, in-office hydra derma abrasion treatments. Vacuum suction is combined with a hydrating solution to create a vortex to exfoliate, deep cleanse and hydrate the skin.

Two suction tips to target every part of the face precisely cleanses 20,000 pores in just 10 minutes. It helps with skin exfoliation, deep cleansing, moisturizing, whitening, and skin lifting! It gives you visible results with just one use! It reduces the whiteheads, blackheads and dead skin - thereby making you glow!

Be fresh and radiant by using this light and user-friendly device that is easy to cleanse and maintain.

Frequency and Direction of Use:
1. Load the solution pod with the aqua peel toner and turn on the device.
2. Don’t forget to wait for a minute before using the hand piece.
3. Massage along your skin in upward motions, going over five times for each section.
4. While using on the nose, change the hand piece to the smaller head and massage it thoroughly.
5. Finish off with a soothing mask and moisturizer.
6. Remember to discard the waste content that will be accumulated in the pod when you’re done.
7. Can be used 2-3 times a week.
8. Safe and suitable for all skin types
9. Refrain from using on wounded areas
10. When using or after usage, in case of any side effects like itching or red spots, stop using the product.

How to Install the Device:
1. Please check the manual prior to usage
2. First, pour the solution in the clean cylinder till the red line
3. Attach the cylinder and make sure they are tightly fixed
4. Open the hose storage box
5. Check the square and circle hose connection marks
6. Connect the hose respectively
7. Press the power button and wait for about 1 minute
8. Put the headpiece on and check the suction on your hand
9. Use the device on your face.
10. You can press the UP/DOWN button to adjust the suction
First level: white light --- second level: green light --- third level: yellow light --- fourth level: purple light --- fifth level: red light

What to do if suction is not working
1. Make sure the cylinder is tightly fixed
2. Next, make sure the hose is plugged in right
3. Check the circle and square shape while connecting the hose
4. Wipe the red silicon where we attach the cylinder with a tissue
5. Make sure the head is plugged in well
6. Cleanse the hose, by pouring in hot water until the red light and running the device.

How to connect the hose?
Open the inside of the machine and take out the hose. The hose is round and straight (circle and square), and is connected to the machine accordingly. Install in accordance with the signs on the machine diagram to avoid reverse installation and cause water overflow.

Machine Cleaning Method:

• Remove the solution pod and wastewater pod from the machine.
• Use natural detergent to clean the two pods, dry them and install them back on the machine.
• Regularly clean the inside of the hose, with hot water by filling the cylinder with hot water and running the device.
• Press POWER, then PUMP, the inside of the machine is cleaned (make sure the suction head cover is closed)
• After cleaning for 10 minutes, pour out the inner water of the two pods, wash and dry the pods before installing them back to the machine.

Warranty:
1-year Local warranty (not valid for human mishandling)

Exchange Process (less than 1 month after purchase)
1-1 exchange with COCOMO at our warehouse

Exchange Process (more than 1 month after use)

• Buyer to send device back to Korea for analysis
• Once brand owner confirmed device is free of mishandling,we will send a new piece to the buyer
• Buyer has to send the device back to korea for testing at their own cost
• COCOMO will send the new device once analysis is completed at our own cost